forcnet.org
  • Home
  • Privacy Policy
  • Contact Us
  • Guest Post – Write For Us
  • Sitemap
forcnet.org

Something happened error in Windows 10

  • James Gussie
  • September 6, 2021
Total
0
Shares
0
0
0

Windows 10 is a great operating system, but from time to time, something happens error. If you have experienced something like this, then read the following article to find out how to fix it. For this problem, you can either set up a virtual machine or do a clean Windows 10 installation.

Error in getting something to the right place? Not their fault? Want to see if it’s them? Go to Settings > Update & Security > Recovery > Advanced Startup Options > Troubleshoot > Advanced options > System Restore.

I have been having a problem with my Windows 10 for a while now. It started when I was editing some photos on my PC. Then I tried to install some software on my PC. It was working fine for a while, but then it suddenly stopped working.

Milan Stanojevic is a writer who lives in Belgrade, Serbia.

Windows & Software Expert

Milan has been fascinated by computers since he was a kid, and this has led him to be interested in all PC-related technology. He worked as a front-end web developer before joining WindowsReport. Continue reading

Updated on September 2, 2021

Originally published in March 2018

  • There are a number of reasons why switching to Windows 10 may be difficult.
  • When attempting to update to Windows 10, many report receiving the Something occurred problem message, which we investigated and provided comprehensive solutions to in this post.
  • The following tutorials provide in-depth information regarding this kind of error message on a Windows 10 PC.

Something-happened-error-in-Windows-10

We suggest DriverFix to solve a variety of PC issues: This program will maintain your drivers up to date, ensuring that you are protected against frequent computer problems and hardware failure. Check all of your drivers right now in three simple steps:

  1. DriverFix may be downloaded here (verified download file).
  2. To identify all faulty drivers, click Start Scan.
  3. To obtain updated versions of drivers and prevent system failures, go to Update Drivers.
  • This month, 0 readers have downloaded DriverFix.

You may get the Something occurred error notice when upgrading to Windows 10, which may cause your Windows 10 installation to fail.

The Something Happened notice may occur in a variety of circumstances, and users have reported the following issues with it:

  • Media Creation Tool for Windows 10 There was an issue executing this tool – This is a common issue with the Media Creation Tool. If you run across this issue, give some of these remedies a go.
  • Something occurred. The installation of Windows 10 was unsuccessful — If your Windows 10 installation fails because of this error, it’s possible that the issue is with your system locale. Simply set your locale to English and see if that resolves the issue.
  • Windows 10 is the latest version of Microsoft’s operating We were unable to deploy a feature due to an unforeseen circumstance — This warning has been reported by many users on their computers. If this issue happens, you may be able to resolve it by using the Windows Update Troubleshooter tool.
  • Something occurred. 0x20016 — Windows 10 This is a different version of the same mistake. If you see this error number, make sure all of the required services are functioning.
  • Something went wrong when installing Windows 10 – This error message may appear owing to a shortage of space on your disk. To correct this, clear some space and start the installation again.
  • Windows 10 can build a bootable USB drive. Something went wrong — This issue was reported by many users when generating a bootable USB drive. Because your antivirus software may be at blame, you may need to temporarily disable it.
  • Something occurred. Media Creation Tool for Windows 10 – This issue may occur while using the Media Creation Tool. You must run the utility with administrator rights to resolve the problem.

Fortunately, we have a number of options that may assist you, and we’ll go through each one in this post.

How can I get rid of the problem notice that appears when I try to update Windows 10?

1. Turn off or remove your antivirus program.

  1. In the Search box, type Settings and choose it.  Something-happened-error-in-Windows-10
  2. From the Settings menu, choose Apps.  1630594959_617_Something-happened-error-in-Windows-10
  3. In the Search box, type antivirus and then click Uninstall application.  1630594960_60_Something-happened-error-in-Windows-10

If you have your antivirus turned off but still receive the Something occurred notice, try removing it.

Remember that uninstalling your antivirus leaves your machine exposed, therefore you should consider switching to another antivirus service.

If you wish to prevent any security problems when uninstalling your antivirus software, you may also use a third-party solution.

2. Double-check that you have adequate room.

  1. Type Storage settings into the search box and choose it. 1630594960_417_Something-happened-error-in-Windows-10
  2. Check to see whether there is enough space on your computer to install Windows 10.  1630594961_738_Something-happened-error-in-Windows-10

If you’re seeing the Something occurred error message on your computer, it may be due to a shortage of storage space. This issue occurs when updates don’t have enough room to install.

You’ll need to free up some space on your system partition to solve the problem. You may do it manually, but we recommend using specialized software like Ashampoo WinOptimizer.

The user interface is intuitive and simple to use. All you have to do is choose the Drive Cleaner option from the Maintain system menu and let the program take care of the rest.

Ashampoo WinOptimizer is available for download.

3. Log in as an administrator.

  1. Right-click the Media Creation Tool.exe file to open it.
  2. From the menu, choose Run as administrator. 1630594961_868_Something-happened-error-in-Windows-10
  3. Continue with the Windows update.

4. Verify that specified services are operational.

  1. Type Services into the search box and choose Services. 1630594962_998_Something-happened-error-in-Windows-10
  2. When the Services window appears, look for the services listed below:
    • Windows Update OR Automatic Updates
    • Intelligent Transfer Service in the Background
    • Server
    • Workstation
    • Helper for TCP/IP NetBIOS
    • IPsec Keying Modules IKE and AuthIP
  3. Double-click on any of the services that we’ve mentioned.
  4. Take a look at the Startup Types section. Make sure that Automatic is selected as the Startup type.
  5. Check the status of the service after that. To start that service if it isn’t already running, click the Start button.
  6. To save the changes, click Apply and OK. 1630594963_922_Something-happened-error-in-Windows-10
  7. Steps 3 and 4 must be repeated for each of the services specified in Step 2.
  8. Close the Services window and restart your computer after you’re finished.

5. Remove the SoftwareDistributionDownload folder from your computer.

  1. Go to the location C:WindowsSoftwareDistributionDownload.
  2. As an administrator, open Command Prompt.
  3. Choose Command Prompt (Admin) from the list by pressing Windows Key + X. 1630594963_842_Something-happened-error-in-Windows-10
  4. Type the following into the Command Prompt when it appears:
    • wuauserv wuauserv wuauserv wuauserv Something-happened-error-in-Windows-10
  5. Everything in the C:WindowsSoftwareDistributionDownload folder should be deleted.
  6. Return to Command Prompt and type the following:
    • wuauserv wuauserv wuauserv wuauserv 1630594965_188_Something-happened-error-in-Windows-10
    • wuauclt.exe /updatenow wuauclt.exe /updatenow wuauclt 1630594965_326_Something-happened-error-in-Windows-10
  7. Close Command Prompt and choose Windows Update from the Control Panel.

6. Double-check that your Taskbar is correctly positioned.

1630594966_424_Something-happened-error-in-Windows-10

If you attempt to update to Windows 10 when your Taskbar isn’t at the bottom of the screen, an error message may display.

Although this is an uncommon occurrence, if your Taskbar has been relocated to a different position, just drag it back to the bottom of the screen and try upgrading to Windows 10 again.

7. Modify the system locale

  1. From the Control Panel, choose Region. 1630594966_900_Something-happened-error-in-Windows-10
  2. Change the system locale by going to the Administrative tab and clicking the Change system locale button. 1630594967_417_Something-happened-error-in-Windows-10
  3. Make that English (United States) is chosen in the Current system locale.
  4. To save the changes, click OK. 1630594967_480_Something-happened-error-in-Windows-10
  5. To dismiss the Region window, click Apply and OK.
  6. Your computer should be restarted.
  7. Start the Media Download Tool and download the Windows 10 ISO file once again.

8. Make English your primary language.

If you’re using a language pack, you may receive a Something occurred error. To resolve this problem, you must uninstall any non-English language packs from your computer and replace them with an English language pack.

Several users, however, have experienced this issue while using English language packs such as en-AU or en-UK.

To fix that problem, you need to go to Region & language settings section in the Settings app and remove any additional language packs.

Also, make sure that the en-US English pack is set as the default language.

9. Create a new DWORD in the Registry.

  1. By hitting Windows Key + R and entering regedit, you may access Registry Editor.
  2. To open Registry Editor, press Enter or OK. 1630594968_89_Something-happened-error-in-Windows-10
  3. Go to the following key in the left pane:
    • HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade
  4. You’ll have to generate the key if it doesn’t already exist. Right-click the following key to create the OSUpgrade key:
    • HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdate
  5. Select New and then Key.
  6. OSUpgrade is the name of the newly generated key. 1630594968_919_Something-happened-error-in-Windows-10
  7. Make your way to the OSUpgrade key.
  8. Choose New and DWORD (32-bit) Value from the right-click menu in the right pane. 1630594969_437_Something-happened-error-in-Windows-10
  9. AllowOSUpgrade should be the name of the new DWORD.
  10. To view the attributes of the AllowOSUpgrade DWORD, double-click it.
  11. To save the changes, update Value data to 1 and click OK.
  12. Close Registry Editor and attempt to run Windows Update once again.

10. Use the Troubleshooter for Windows Updates

  1. As an administrator, open Command Prompt.
  2. Disable the BITS service, as well as the Windows Update and Cryptographic services. To accomplish so, type the following lines and hit Enter after each one:
    • halt bits on the internet
    • wuauserv wuauserv wuauserv wuauserv
    • appidsvc appidsvc appidsvc appidsv
    • stop cryptsvc on the network
  3. Backup copies of software distribution should be renamed. To do so, open Command Prompt and type the following into it, pressing Enter after each line of code:
    • SoftwareDistribution% Ren% systemroot% Ren% systemroot% Ren% systemroot% Ren% systemroot% Ren SoftwareDistribution.bak 1630594969_383_Something-happened-error-in-Windows-10
    • catroot2.bak ren % systemroot % system32catroot2 % system32catroot2 % systemroot % system32catroot2 1630594970_758_Something-happened-error-in-Windows-10
  4. Now type the following instructions to restart the BITS service, the Windows Update service, and the Cryptographic service:
    • halt bits on the internet
    • wuauserv wuauserv wuauserv wuauserv
    • appidsvc appidsvc appidsvc appidsv
    • stop cryptsvc on the network
  5. Restart your computer and reinstall Windows 10.

That is all there is to it. We hope that one of the methods given here was able to assist you in resolving the Windows 10 update issue. If you have any other ideas or tips, please share them in the comments area below.

Was this page of assistance to you?

Thank you very much!

There are insufficient details It’s difficult to comprehend Other Speak with a Professional

Start a discussion.

Today I received a notification on my phone, telling me an update was available for my Windows 10 system. I thought, “Great! I’m tired of seeing the same old things on my screen, and I can’t wait to see what new features this update has.”. Read more about we couldn t install updates because there’s a problem with the date and time information and let us know what you think.

Frequently Asked Questions

How do I fix Windows 10 errors?

There are many ways to fix Windows 10 errors. Here is a list of some common fixes for your error code. Error Code 0x80070005 -Restart your computer -Unplug the power cord from the back of your computer and wait 30 seconds before plugging it back in -Reboot your computer by pressing the power button on the front of your PC -Press Ctrl+Alt+Delete at the same time to restart your computer

What are the errors in Windows 10?

The most common errors in Windows 10 are the blue screen of death, system error 0x0000007b, and a variety of other errors.

How do I find critical error in Windows 10?

Critical errors are used to indicate that something has gone wrong with your computer. They can be caused by a variety of different things, including hardware or software issues. If youre experiencing a critical error on Windows 10, its recommended that you restart your computer and try again.

Related Tags

This article broadly covered the following related topics:

  • something happened and we couldn’t start the upgrade
  • something happened and we couldn’t install a feature windows 11
  • something happened and we couldn’t install a feature disable
  • something happened and we couldn’t install a feature windows 10
  • we couldn t install updates because there’s a problem with the date and time information
Total
0
Shares
Share 0
Tweet 0
Pin it 0
James Gussie

Next Article

Troubleshooting DirectDraw Error on Windows 10 Legacy Games

  • James Gussie
  • September 8, 2021
View Post
Table of Contents
  1. How can I get rid of the problem notice that appears when I try to update Windows 10?
    1. 1. Turn off or remove your antivirus program.
    2. 2. Double-check that you have adequate room.
    3. 3. Log in as an administrator.
    4. 4. Verify that specified services are operational.
    5. 5. Remove the SoftwareDistributionDownload folder from your computer.
    6. 6. Double-check that your Taskbar is correctly positioned.
    7. 7. Modify the system locale
    8. 8. Make English your primary language.
    9. 9. Create a new DWORD in the Registry.
    10. 10. Use the Troubleshooter for Windows Updates
    11. Frequently Asked Questions
    12. Related Tags
Featured
  • 1
    The Complete Guide to Facebook
    • June 4, 2022
  • 2
    What is the life of a fusion core?
    • April 14, 2022
  • 3
    How to Troubleshoot “Steam Running Slow” Problem on Windows PC
    • December 22, 2021
  • 4
    10 Smart Tips to Improve Your Predictions and Win Fantasy Cricket Games on Howzat
    • December 21, 2021
  • 5
    How to Move or Delete Apps on Apple TV
    • December 18, 2021
Must Read
  • 1
    40+ *NEW* Watch Series Proxy and Mirrors in 2020
  • 2
    Pimp My Vault for PC (Download)
  • 3
    Download Cerpen Online for PC Windows 10,8,7
forcnet.org
  • Home
  • Privacy Policy
  • Contact Us
  • Guest Post – Write For Us
  • Sitemap
Stay Updated Always.

Input your search keywords and press Enter.